https://www.adroitextrusionindia.in Latest Products Wed, 20 May 2026 08:09:53 +0530 en-us https://www.adroitextrusionindia.in https://www.adroitextrusionindia.in/blown-film-plants.htm https://www.adroitextrusionindia.in/blown-film-plants.htm Wed, 21 Jun 2023 00:00:00 +0530 https://www.adroitextrusionindia.in/blown-film-plants-accessories.htm https://www.adroitextrusionindia.in/blown-film-plants-accessories.htm Wed, 21 Jun 2023 00:00:00 +0530 https://www.adroitextrusionindia.in/7-5-layer-blown-film-plant.htm https://www.adroitextrusionindia.in/7-5-layer-blown-film-plant.htm Wed, 21 Jun 2023 00:00:00 +0530 7/5 LAYER BARRIER The growing requirements of the packaging industry have driven the development of barrier films, from the early, simple PA/PE structures, to the introduction of EVOH and the use of both symmetrical and asymmetrical complex structures. 7 layer blown film line is equipped with state-of-the-art Cylindrical Spiral Die. Short polymer flow passages decrease residence time which is of great benefit when processing thermally sensitive materials, reduces polymer degradation and quick changeover of the materials. 7 layer blown film lines are customized based on films to be produced. 7 layer blown film lines are available with advanced automation features like gravimetric blending and dosing, extrusion Control, non-contact type IBC system, automatic thickness control (with non-contact capacitive sensor), fully automatic surface winder suitable for different applications. Integrated touch screen based supervisory process control is provided thus rendering it operator friendly. Applications of 7 layer blown film The range of applications include films for long shelf life packaging of edible oils, UHT milk, liquid and solid container liners, frozen food packaging, meat packaging, vacuum packaging, barrier thermoformable film for trays, cups and lid etc. https://www.adroitextrusionindia.in/5-layer-blown-film-plant.htm https://www.adroitextrusionindia.in/5-layer-blown-film-plant.htm Wed, 21 Jun 2023 00:00:00 +0530 5 LAYER POD To meet specific needs, all-PE 5 layer co-extruded blown film line benefitted with down gauging, lower cost of final film, adaptability across applications enhances the ROI still further. This 5 layer line while ensuring a thin skin layer of property polymers and a thick core layer of inexpensive materials, offers enough versatility for processors to produce films that comply to difficult industry demands with specifications that provide a competitive edge to its customers' business, both in terms of diverse film properties and of course at lower costs. The film capabilities with a 5 layer are significant when compared to a conventional 3-layer alternative.  Five layer POD have quickly become the answer to achieve the desired optical properties, printability and sealability by balancing the characteristics of the new resins which are being made available in the raw materials market. Optional Devices​ Gravimetric Dosing System, Extrusion Process Control, Air / Water Chiller, Corona Treater, Bi-Metalic Screw & Barrel Set, Hydraulic Unloading, , Digital Web Aligner, Empty Shaft Loading system, Hydraulic Unloading System, Main Panel Air Condition, Auto Thickness/Width Control, S wrap Cooling System etc. TECHNICAL SPECIFICATION Model Name:  Innoflex Three Layer CO-Extrusion Blown Film Plant Material Used: LDPE, LLDPE, HDPE, PP, CO-POLYMER, EVA etc. Output Range: 100 - 500 Kg/Hr (Depends On Extruder's Size) Screw Diameter: 40/45/55/60/65/75/90 MM (Customized) Screw L/D ratio: 30:1 (Customized) Layflat Width: 1000 - 3000 MM Thickness: 20 – 200 micron   Applications of 5 layer blown film 5 Layer POD lines are tailored for various application segments such as collation shrink films, lamination grade films, milk and water pouches, edible oils, courier bags and many more. To meet specific needs, all-PE 5 layer co-extruded blown film line benefitted with down gauging, lower cost of final film, adaptability across applications enhances the ROI still further. https://www.adroitextrusionindia.in/3-layer-blown-film-plant.htm https://www.adroitextrusionindia.in/3-layer-blown-film-plant.htm Wed, 21 Jun 2023 00:00:00 +0530 3 Layer Blown Film Plant The Innoflex Multilayer Co-extrusion Blown Film Lines Are Available In A Wide Range Of Configurations From Three Layer Non Ibc As Well As Ibc Machines To Produce Variety Of Films. With Passion For Innovation, We Deliver Value For Our Customers. With The Innoflex, We Redefined The Way Our Customers Can Achieve Consistent High Quality Film, Better Output And Best In Class Flexibility By Providing Customized Machine Configurations. The Lines Are Capable Of Producing Different Kinds Of Materials Like Ldpe/ Lldpe/ Hdpe/ Pp/ Mlldpe/ Sealant Polymers/ Additives/ Masterbatches Etc. The Machine Combination Helps To Reduce The Recipe Cost By Allowing The Processor To Run Layer Ratios Upto 1:3:1. Three Layer Blown Film Line Is Equipped With State-of-the-art Cylindrical Spiral Die. Short Polymer Flow Passages Decrease Residence Time Which Is Of Great Benefit When Processing Thermally Sensitive Materials, Reduces Polymer Degradation And Quick Changeover Of The Materials.   Optional Devices​ Gravimetric Dosing System, Extrusion Process Control, Air / Water Chiller, Corona Treater, Bi-metalic Screw & Barrel Set, Hydraulic Unloading, , Digital Web Aligner, Empty Shaft Loading System, Hydraulic Unloading System, Main Panel Air Condition, Auto Thickness/width Control, S Wrap Cooling System Etc.​ Technical Specification Model Name:  Innoflex Three Layer Co-extrusion Blown Film Plant Material Used: Ldpe, Lldpe, Hdpe, Pp, Co-polymer, Eva Etc. Output Range: 100 - 500 Kg/hr (Depends On Extruder's Size) Screw Diameter: 40/45/55/60/65/75/90 Mm (Customized) Screw L/d Ratio: 30:1 (Customized) Layflat Width: 1000 - 3000 Mm Thickness: 20 – 200 Micron   Applications Of 3 Layer Blown Film Lamination Grade Films, Liquid Packaging Films, High Dart Ffs Resin Sacks Films, Cereal Packaging Films, Oil Packaging Films, Pharma And Medical Grade Films, Pallet Hooding Shrink/stretch Films, Green House Films, Silage And Mulch Films And Chemical / Soap Packaging Films And Many More. https://www.adroitextrusionindia.in/aba-blown-film-plant.htm https://www.adroitextrusionindia.in/aba-blown-film-plant.htm Wed, 21 Jun 2023 00:00:00 +0530 ABA & AB Blown Film One extruder for both A-layer, which is smaller, operates slower and only delivers 30%-40% new plastic resins, The other extruder for middle layer, which is a layer that uses recycled plastic resins and CaCo³ to reduce the costing. ABA layer blown film line significantly reduces the cost of raw material while keeping plastic film quality at a high level. Besides reducing amount of raw material, another advantage of ABA plastic film extrusion machine is that the produced 3 layer film is 30% stronger than mono layer. It is a meant for typical application like shopping bags with a finished printing surface on both the sides adding value to the end product. With a slight change in the die block design, one can manufacture 3 layer blown film line in a conventional 2 layer co–extrusion line. The output produced will be a three layer film with top and bottom layer of the same material and a different center layer and if an application requires only 2 layers – e.g. 2 colored bags, one can change the die block and transform A/B/A co-ex to A/B co-ex. Optional Devices Hopper Loader Corona Treater Extra Die Chiller Heat Exchanger Embossing Roll Air Shaft Two Station Surface Winder Bi-Metalic Screw & Barrel Set Die Rotation Technical specifications Model Name:  Duoflex ABA Three Layer & AB Two Layer CO-Extrusion Blown Film Plant Material Used: LDPE, LLDPE, HDPE, CACO3, Virgin Raw Material Output range: 60 - 200 kg/hr Screw Diameter: 35/45/55/65/75 (Customized) Layflat Film Width: 500 - 3000 mm Thickness Range: 20 micron to 150 micron    Applications of Aba & Ab blown film PE general purpose film, HDPE pick-up bags, Shade-net film, PE lamination film, Mulch film, Courier film, Stretch & Cling film, Shrink film, Anti-rust film and Tarpaulin Film etc. https://www.adroitextrusionindia.in/monolayer-blown-film-plant.htm https://www.adroitextrusionindia.in/monolayer-blown-film-plant.htm Wed, 21 Jun 2023 00:00:00 +0530 Monolayer Blown Film   Adroit Extrusion offers widest range of customized monolayer blown film lines to suit a broad spectrum of resins, applications and output levels. Customers opting for monolayer can therefore be sure to produce best film quality with economical use of resources, short start-up and low change-over times as well as reduced waste and high productivity.  Monolayer blown film lines are available with outputs ranging from 30 kg/hr to 200 kg/hr and lay-flat widths ranging from 500 mm to 3000 mm for processing polymers as LD, LLD, HM – HDPE. It also has advanced features like-grooved feed section, barrier screw, gravimetric blending/dosing system, Liquid PIB dosing system, manual screen changer, oscillating haul-off, internal bubble cooling, Motorised bubble cage surface winders with taper tension control. Greenovative   Technology Bio-Degradable / Compostable Film   Bio degradable plastics are plastics degraded by microorganisms into water, carbon dioxide (or methane) and biomass under specified conditions. To guide consumers in their decision-making and give them confidence in a plastic’s biodegradability, universal standards have been implemented, new materials have been developed, Biodegradable refers to the ability of materials to break down and return to nature. Compostable materials are similar to biodegradable materials, as they are both intended to return to the earth safely. However, compostable materials go one step further by providing the earth with nutrients once the material has completely broken down PLA (polylactic acid) is typically made from the sugars in corn starch, cassava or sugarcane. It is biodegradable, carbon-neutral, and edible.  The machine equipment designed to run such specialty materials very easily. Blown film line is equipped with state-of-the-art Cylindrical Spiral Die. Short polymer flow passages decrease residence time which is of great benefit when processing thermally sensitive materials, reduces polymer degradation and quick changeover of the materials. Proven screw & barrel deign homogenizes the polymers properly which results in defect free film.  We designed the equipment in such a way that Special polymers can process smoothly. Optional Devices Hopper Loader, Corona Treater, Extra Die, Chiller, Heat Exchanger, Embossing Roll, Air Shaft, Two Station Surface Winder, Bi-Metalic Screw & Barrel Set, Die Rotation etc. https://www.adroitextrusionindia.in/vertical-granule-mixer-with-dryer.htm https://www.adroitextrusionindia.in/vertical-granule-mixer-with-dryer.htm Wed, 21 Jun 2023 00:00:00 +0530 VERTICAL GRANULE MIXER WITH DRYER ​ Vertical Mixer is for mixing Plastic granules, Master batch etc. The mixer operates only with only 1 HP motor. Most power efficient in industry. The inside Screw rotates and lifts the material and drop it from the top.  Chamber is provided inside the drum which is connected to the Heater and Blower to remove the moisture from the material. The mixer is available in different capacity from 50 kg to 5000 kg. https://www.adroitextrusionindia.in/mild-steel-extrusion-process-control.htm https://www.adroitextrusionindia.in/mild-steel-extrusion-process-control.htm Wed, 21 Jun 2023 00:00:00 +0530 EXTRUSION PROCESS CONTROL Extrusion Process Control system (EPC) provides a supervisory and single window to all key operating parameters associated with the extrusion production process. Extrusion control system tracks material being fed to the extruder through loss in weight system constantly measured by load cell and automatically adjusts  screw rpm and the haul-off speed to maintain a consistent product output and thickness regardless of changes in raw materials, ambient conditions or processing variables. https://www.adroitextrusionindia.in/gusset-board-assembly.htm https://www.adroitextrusionindia.in/gusset-board-assembly.htm Wed, 21 Jun 2023 00:00:00 +0530 GUSSET BOARD ASSEMBLY Gusset Board Assembly to produce full gusseted film. Wooden and Metal gusset board options available. Gusset boards are also available with motorized operation. Can be fixed on any machine.  https://www.adroitextrusionindia.in/trim-recycling-machine.htm https://www.adroitextrusionindia.in/trim-recycling-machine.htm Wed, 21 Jun 2023 00:00:00 +0530 TRIM RECYCLING MACHINE Edge trim unit was introduced on the basis to the subject of “Green Eco Friendly” awareness to the Plastic Film production industry. The unit cleverly integrated advanced structural design with Innovative concept for reclaim trimmed film edge uninterruptedly within the system. The process starting from edge trim feeding, cutting and feeding in the extruder, all in one complete process promised to save labor cost, power consumption and process time. https://www.adroitextrusionindia.in/vacuum-loaders.htm https://www.adroitextrusionindia.in/vacuum-loaders.htm Wed, 21 Jun 2023 00:00:00 +0530 HOPPER LOADER Vacuum loaders are the simplest version of a ‘resin conveying system’ Vaccum transfer of plastic pallets and regrind from material source to a hopper or bin over a moderate distance using powerful 3 phase blower. Standard models are designed for plate / flange mounted to existing hopper or bin. Cost effective central blower and control to cater multiple hopper simultaneously.  https://www.adroitextrusionindia.in/plastic-granule-and-powder-mixer-machine.htm https://www.adroitextrusionindia.in/plastic-granule-and-powder-mixer-machine.htm Wed, 21 Jun 2023 00:00:00 +0530 PLASTIC GRANULE AND POWDER MIXER Color mixer is widely used for mixing, stirring powder and granule materials. Mixing can be done in a short period of time and it has high performance. Both mixing barrel and the mixer are made up of stainless steel and polished. A vertical reducer motor is adopted to ensure low noise and durable. Vertical color mixers are widely used in plastic injection, plastic recycling, powder metallurgy, pharmacy chemicals, foodstuff and ceramic ware.  Available from 25 to 100 kg capacity. https://www.adroitextrusionindia.in/plastic-recycling-machine.htm https://www.adroitextrusionindia.in/plastic-recycling-machine.htm Wed, 21 Jun 2023 00:00:00 +0530 PLASTIC RECYCLING MACHINE No need of Water / Heating. Cold Start. Unique design. Lowest Power Consumption: 0.15 kwh/kg Minimize damage to raw materials (Temperature below melting point) Crushing and Granulation are completed in one time Process wet materials (less than 10% moisture) Powder can be separated from granules, the waste are reprocessed and recycled. Small footprint, requiring less manpower.  https://www.adroitextrusionindia.in/adroit-bubble-slit-assembly.htm https://www.adroitextrusionindia.in/adroit-bubble-slit-assembly.htm Wed, 21 Jun 2023 00:00:00 +0530 BUBBLE SLIT ASSEMBLY To convert plastic film from tube to sheet on blown film. Precisely machined CNC parts. Hard Anodized Aluminium body for wear resistant surface. Dual blade design for quick changeover the blade in running production. Many air ports provided for maximum cushioning to the film. Very beneficial in running sticky and sensitive films. Wear resistant Stainless Steel rollers for longer life.